Center Lock or 6-bolt? 160mm or 180mm? We explain everything you’ve ever wanted to know about disc brake rotors with our in-depth buyer’s guide

By Finlay Anderson

Published: Wednesday, 24 May 2023 at 12:00 am


A disc brake rotor is a component that mounts to the hub of a bicycle wheel and provides the braking surface in a disc brake system.

Disc brake rotors come in a wide variety of sizes to suit different riding disciplines and terrain.

The simplest disc brake rotor will be stamped from a sheet of stainless steel. More expensive rotors use more complex constructions to improve braking performance and reduce weight.

Though other standards have existed, modern rotors mount via one of two standards – 6-bolt or Center Lock.

In this article, we outline everything you need to know about disc brake rotors, including what to look for if you’re shopping for new rotors for your bike.

What are disc brake rotors?

"Buyer's
A disc brake rotor attaches to the hub of a wheel. It is a separate component.
Jack Luke / Our Media

The disc brake rotor is the metal disc attached to the hub of the wheel. The rotor is the braking surface for the brake pads and caliper.

They are available in different sizes and designs to suit different applications.

Some disc rotors are designed to provide as much power and heat dissipation as possible, whereas others prioritise low weight over all-out braking power.

Disc brake rotor sizes explained

"Buyer's
Disc brakes come in a wide array of sizes and designs to suit all types of riding and terrain.
Jack Luke / Our Media

The job of a disc brake rotor is to slow the rolling momentum of the wheel, using friction created by the brake pads and caliper squeezing the rotor.

In doing so, heat is generated. The bigger the disc rotor, the more heat can be absorbed before it overheats and braking power starts to drop (or fade, to use the correct term).

Generally speaking, the bigger the rotor, the better the braking performance will be.

However, not all bikes and riders need maximum braking power. In many cases, it’s about finding the balance between power, brake feel and weight.

"Rear
140mm rotors are generally only used on road and gravel bikes.
Matthew Loveridge / Immediate Media

As a general rule, road and cyclocross rotors sit in the 140 to 160mm range, striking a balance between necessary braking power and low weight.

Modern mountain bike brakes often come specced with rotors ranging from 180 to 220mm.

"Canyon
Hard-hitting enduro or downhill bikes may have 200mm+ rotors fitted front and rear.
Finlay Anderson / Our Media

Many mountain bikes will have a larger front rotor, paired with a smaller rear rotor (200mm front and 180mm rear, for example).

However, it’s becoming more and more common to see large rotors (200mm and up) being specced front and rear on enduro or downhill mountain bikes. Electric bikes may also use larger rotors to compensate for additional weight.

140mm160mm180mm 200mm+
Road bikesXX
Gravel bikesXX
XC bikesXX
Downcountry bikesXX
Trail bikesXXX
Electric bikesXXX
Enduro bikesXX
Downhill bikesX

Disc brake rotor design and materials explained

"Buyer's
Basic rotors are stamped, laser cut or water cut from stainless steel.
Jack Luke / Our Media

Most rotors are made from high-quality stainless steel, which provides a durable braking surface suitable for use in all conditions.

The braking surface is designed with cut-outs, as well as recessed slots. These enable water, mud and other road or trail debris to clear out from between the pad and the rotor.

Strategically placed holes also help to shed weight without impacting performance.

One key design aspect is the rotor’s ability to dissipate heat. This is achieved in a number of ways.

Some rotors feature heat-dissipating paint applied to the ‘spokes’, which connect the braking surface to the central portion of the disc.

"SRAM
The HS2 rotor (right) is marginally thicker than the CenterLine rotor (left).
Alex Evans

Another method, seen in SRAM’s latest MTB rotors, is to increase the thickness of the rotor itself.

Some disc brake rotors use a floating design borrowed from motorcycles, where the stainless steel braking surface is attached to an aluminium carrier by rivets.

"The
IceTech rotors are claimed to help dissipate heat.
Russell Burton / Immediate Media

This design is claimed to offer improved heat dissipation and resistance to warping over standard steel rotors, while also being a little lighter.

Shimano IceTech rotors sandwich a finned alloy layer between the two stainless steel braking surfaces to improve heat dissipation.

Disc brake rotor mounting standards – Center Lock vs 6-bolt

"Buyer's
6-bolt (left) rotors are more common than Center Lock (right) rotors.
Jack Luke / Our Media

In order for a disc brake to function properly, the mounting interface attaching the rotor to the hub has to be stiff and strong. Two mounting standards are used.

The first and most common is the six-bolt standard.

Here, the disc rotor is attached to the hub via six Torx bolts, laid out in a circle around the axle.

"DT
It is possible to convert Center Lock hubs to work with 6-bolt rotors.
Russell Burton / Our Media

The six-bolt design is light, strong and simple and, while somewhat tedious, it doesn’t require any specialist tools to install or remove a rotor.

The second standard is called Center Lock. Here, the rotor fits onto a splined interface on the hub and is secured by a threaded ring that screws onto the hub, holding the rotor in place on the splines.

While removal and installation are slightly simpler, a Shimano HyperGlide-style cassette tool or bottom bracket tool is required.

Compatible pads

There are three main types of disc brake pads available – organic, sintered and semi-metallic. Each pad material has its own properties.

You can run any of the available pad compounds with any brake rotor, provided you take the time to properly bed in the new pads.

When to replace your disc brake rotors

"Cropped
Like pads, rotors will wear out over time.
Andy Lloyd / Our Media

Just like brake pads, rotors are consumable parts. Braking erodes material from the rotor and, in time, they need to be replaced.

Thickness is a good indicator of when it’s time to replace your rotors.

Shimano recommends its rotors, which are 1.8mm thick out of the box, should be replaced when they measure 1.5mm or thinner.

SRAM also recommends replacing your rotors when their wear exceeds 0.3mm, or when their thickness is less than the minimum value stated on the rotor.

How do I know which disc brake rotors I need?

"hope
Lots of third-party brands produce rotors suitable for many brands of disc brakes.
Tom Marvin / OurMedia

When in the market for new disc brake rotors, there are a few things to keep in mind.

First of all, it makes sense to stick to the same brand as your existing brakes, unless you’re looking specifically for aftermarket options.

Next, you have to take into consideration the mounting standard you have on your current wheels – this will either be six-bolt or Center Lock.

The final decision is the rotor size.

First, consult the maximum rotor size your frame and fork are rated for. Then, decide if you need more power. If you feel your brakes are fading frequently and you wish you could slow down easier, we recommend sizing up to a larger rotor (if possible).

It’s important to note you may also need to buy new brake-mount spacers to accommodate the larger rotor.