Price:<\/strong> \u00a318 as tested<\/li>

Length:<\/strong> 131mm<\/li>

Diameter:<\/strong> 32mm<\/li><\/ul>
Your hands drop neatly into place on the S2s, as the Extra Soft rubber sags a little under your weight. The diamond-cut pattern and raised finger strips keep your hands exactly where you want them.<\/p>
They provide unparalleled damping and lessen wrist-jarring on big impacts. The single lockring means you can easily access the full width of the grip, with support over the whole palm.<\/p>
However, there\u2019s no escaping how quickly the Extra Soft Compound rubber wears down, with these showing signs of it after testing, but that\u2019s the trade-off for their top-level compliance and feel.<\/p>
<\/div>
Chromag Format<\/h3>

<\/div>
$\"Best$
Chromag has etched its name in the rubber pattern of these grips. – Russell Burton \/ Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a322\/$30\/\u20ac24\/AU$39 as tested<\/li>
Length:<\/strong> 134mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
Considering how good these Chromag grips are at damping vibrations coming through the bar, the direct handling you get from these slim-feeling grips is impressive.<\/p>
The finger ridges do a decent job of adding mechanical grip \u2013 even though they aren\u2019t the biggest \u2013 and the ribbing for thumb comfort is softer than most. A subtle outboard flange adds support when resting your hands right at the edge of the grips.<\/p>
We didn\u2019t always find our fingertips sat in the indents. As on most grips here, you can\u2019t use your bar for tool storage due to the integrated end caps.<\/p>
<\/div>
DMR Deathgrip Race Edition<\/h3>

<\/div>
$\"DMR$
Due to the rubber compound, black is the only colour option. – Steve Behr \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a326\/$28.95\/\u20ac27.99 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
DMR’s Deathgrip Race Edition grips offer huge amounts of traction thanks to their super-soft and ‘race’ compound construction which has been developed in collaboration with Brendan Fairclough.<\/p>
Alongside tacky rubber, the knurl pattern bites into hands and gloves well, providing unparalleled grip while still remaining plush for damping.<\/p>
All this traction does come at a cost, with the grips relatively quick to wear out.<\/p>
A ‘mushroom’ section near the thumb allows for shifters and dropper levers to be used while still feeling a secure connection to the bar through rough sections.<\/p>
<\/div>
DMR Deathgrip<\/h3>

<\/div>
$\"DMR$
DMR\u2019s Death Grips deliver unparalleled traction and form, proving to be top performers in all conditions. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a323 as tested<\/li>
Length:<\/strong> 133mm<\/li>
Diameter:<\/strong> 31.3mm<\/li><\/ul>
DMR\u2019s Death Grip offers serious levels of traction even in the worst of conditions, with the multi-pattern design providing grip even when slathered in mud. <\/p>
The thick mushroom tread around the inside of the grips helps you to feel connected with the bar when moving your digits off for breaking and shifting, while the small overlap of the clamp protects your inner knuckles from irritation. <\/p>
Good adhesion is made thanks to the knurled diamond pattern on the outside of the grip, aiding in keeping rotational and lateral movement to a minimum. <\/p>
The soft 20A compound provides plenty of tack, even on cold days and makes a good home for gloved and gloveless hands. <\/p>
Plenty of well-placed cushioning is provided, though it doesn\u2019t come at the sacrifice of feedback through the bar.<\/p>
<\/div>
Gusset Matt Jones S2 Lock-On <\/h3>

<\/div>
$\"Gusset$
Gusset\u2019s S2 Lock-On grips provide secure and positive feedback through rough terrain, while remaining comfortable on longer rides. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a323 \/ $30 as tested<\/li>
Length:<\/strong> 131mm<\/li>
Diameter:<\/strong> 32mm<\/li><\/ul>
The S2’s eccentric off-centre core design provides plenty of performance, adding bulk-free cushioning to the top side of the grips. <\/p>
A single clamp keeps the S2s from twisting on the bars, with a 3mm Allen key used to tighten it. <\/p>
Gusset\u2019s standard \u2018soft\u2019 30A VEXK compound covers the entirety of the grip and helps give a tacky feel, while the chamfered clamp design keeps things comfy when changing gear. <\/p>
Horizontal ribs on the inside of the grips stop your hands from rotating on heavy landings, while vertical radial ribs on the end give confidence that they won\u2019t slide off laterally. <\/p>
The diamond pattern in the palms grips sweaty hands and wet gloves with ease, while the ribbed underside gives plenty of purchase for digging fingers into.<\/p>
Read our full Gusset Matt Jones S2 Lock-On Grips review<\/a><\/li><\/ul>
<\/div>
ODI AG-2<\/h3>

<\/div>
$\"Best$
In a sea of black grips, it’s nice to see a pop of colour. – Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a330 \/ $35 \/ AU$55 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 30.5mm<\/li><\/ul>
Developed with Aaron Gwin, you\u2019d expect these single-lockring grips to take a thrashing, and they don\u2019t disappoint.<\/p>
The AG-2s have a very direct feel, transmitting a reassuring amount of feedback from the bar. Raised finger slots and large-diameter ends keep your digits in place, while the rubber compound used is forgiving enough to damp the buzz from rougher trails.<\/p>
They\u2019re the priciest on test, though \u2013 not a deal-breaker, but not ideal if you tend to wear out grips quickly. The smaller diameter in the thumb area sometimes left us wanting more support for the inside of our palms.<\/p>
<\/div>
PNW Loam <\/h3>

<\/div>
$\"PNW$
The grips weighed in at 96g for the pair, 6g over the claimed weight. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a326 as tested<\/li>
Length:<\/strong> 133.5mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
PNW\u2019s Loamer grips use a varying tread pattern that employs a spiral mushroom pattern on the inside of the grip that counters hand rotation well and adds cushioning between your finger and thumb, relieving fatigue on long rides. <\/p>
A dense, zig-zag pattern on the top of the grip provides support for your palm and helps reduce trail chatter vibrating up your arm. <\/p>
Horizontal grooves on the underside of the grip provide plenty of purchase for your fingertips to dig into, making it comfortable to strangle the bars through rock gardens. <\/p>
The soft compound feels great gloveless and extends around the bar end, doing a good job of hiding scratches when resting the bike on the ground. <\/p>
On the outside of the grip, there’s no taper, enabling you to overhang your hands without interference.<\/p>
Read our full PNW Loam grip review<\/a><\/li><\/ul>
<\/div>
Race Face Chester <\/h3>

<\/div>
$\"Race$
The grips are available in 31mm and 34mm diameters, and there is a choice of nine colourways. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a325 \/ $27 as tested<\/li>
Length:<\/strong> 136mm<\/li>
Diameter:<\/strong> 31mm<\/li><\/ul>
Race Face’s Chester grips use flanged mushroom tread that sits next to the clamp and helps keep you in contact with the bar when removing a digit for shifting or braking, while giving extra cushioning between the thumb and forefinger. <\/p>
On the top of the grip, there’s extra padding, which helps to isolate your palm from trail buzz, while the angled ribbing helps keep your hands from slipping sideways. <\/p>
The tapered outside gives a good indication of the bar end without restricting your palms from creeping over it should you prefer to ride in that style. <\/p>
The compound feels tacky even in cold temperatures, with the grips among the best on test during wet conditions. <\/p>
The grips are easy to install, slipping over the bar with ease and remaining fixed in place thanks to the single clamp.<\/p>
Read our full Race Face Chester grips review<\/a><\/li><\/ul>
<\/div>
Brand-X Half-Waffle<\/h3>

<\/div>
$\"Brand-X$
For the price, the performance is unmatched. – Steve Behr \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a37.99 \/ $9.99 \/ \u20ac8.99 \/ AU$12.99 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 28.5mm, 31mm<\/li><\/ul>
Brand-X is known for its value for money, with the Half-Waffle grips being no exception, bringing lock-on grips to an ultra-low price point.<\/p>
A tapered design that widens towards the end of the grip gives confidence while providing plenty of control through the palm of your hand.<\/p>
The knurled pattern and half-waffle design on the underside of the grip give it plenty of traction, with the performance unparalleled in grips usually found at this price point.<\/p>
While the plastic lock-on clamp isn’t as effective as the metal kind found on more expensive grips, it does a good job of preventing grip twist.<\/p>
<\/div>
ODI Elite Pro<\/h3>

<\/div>
$\"ODI$
The half-waffle underside helps keep your fingertips in place. – Steve Behr \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a327.99 \/ $29.95 \/ \u20ac30 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 30mm, 32mm<\/li><\/ul>
The Elite Pros have an ergonomic design that offers high comfort levels without being overly bulky.<\/p>
The thick rubber numbs vibrations through the bars, while maintaining a direct feel for accurate line choice, though this disappears towards the ends of the grips, where it’s needed most.<\/p>
A large outboard flange is positioned at the end of the grip, which we found reassuring, especially if you hold your bars at the ends.<\/p>
The half-waffle design adds plenty of traction, though we’d have liked a softer rubber for greater comfort.<\/p>
<\/div>
ODI Vans V2.1 Lock-on Grips<\/h3>

<\/div>
$\"ODI$
ODI\u2019s Vans V2.1 Lock-on grips provide a tacky and responsive feel that gives plenty of traction. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a329.99 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 31mm<\/li><\/ul>
ODI’s sole-inspired grips provide ample traction in all but the muddiest of conditions, with the varying waffle pattern adding good tack and cushioning. <\/p>
An unintrusive mini-flange on the inside of the grip adds comfort to your thumbs when shifting gear and acts as a good marker of where your hands are in relation to the bars. <\/p>
On cold, wet days the tackiness of the rubber diminishes making the grip less adhesive but the diamond-shaped grip pattern makes up for this in most circumstances, although the addition of mud can make the grips quite slippy, as anyone with experience of Vans shoes can attest to. <\/p>
With bare hands, the grips feel amazing, with the underside tread providing good support for nestling your fingers into. The square ends allow you to overhang your palms while maintaining a lateral grip.<\/p>
<\/div>
OneUp Grips<\/h3>

<\/div>
$\"Best$
These grips have a tapered design with a narrower diameter near the lock-on collar. – Russell Burton \/ Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a323 \/ $25 \/ \u20ac26 as tested<\/li>
Length:<\/strong> 135mm<\/li>
Diameter:<\/strong> 28.5\u201330mm<\/li><\/ul>
The OneUp Grips are made from a soft rubber with a slightly tacky feel, and the diamond pattern gives plenty of traction. Directional ridges add even more purchase.<\/p>
The grips taper in diameter from 28.5mm near the lock-on collar to 30mm at the outboard end, where there\u2019s a slight flange, which adds support and cushioning. The ride feel is direct without becoming harsh.<\/p>
They lack the additional thumb cushioning that some other designs provide, so if you have large hands or prize comfort over all else, the slim shape may not suit you.<\/p>
<\/div>
Renthal Push-On Ultra Tacky<\/h3>

<\/div>
$\"Best$
These grips glue in place, stopping any rotation. – Russell Burton \/ Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a313 \/ $17 as tested<\/li>
Length:<\/strong> 136mm<\/li>
Diameter:<\/strong> 27.5mm<\/li><\/ul>
Looking for the most direct and responsive-feeling grips possible? The Renthal Push-On Ultra Tacky grips are some of the best.<\/p>
The lack of a plastic insert means they provide comparable damping to thicker options. Installing them with glue is quick and easy, too, and they stayed in place during testing. The rubber really is ultra tacky, so it helps with keeping your hands in place, as does the flange at the end.<\/p>
There are no finger ridges or waffle pattern for added grip and if you can\u2019t detach your brake levers, gear shifter or dropper post lever without also removing your grips, these aren\u2019t your best bet.<\/p>
<\/div>
Renthal Traction UltraTacky<\/h3>

<\/div>
$\"Best$
Renthal’s UltraTacky grips are big on purchase and soak up a lot of trail chatter. – Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a325 \/ $33 \/ AU$55 as tested<\/li>
Length:<\/strong> 130mm<\/li><\/ul>
Renthal\u2019s UltraTacky lock-ons offer so much purchase that even a layer of dust or grime doesn\u2019t affect grip. The \u2018traction ridges\u2019 stop your hands slipping on flat landings. Plus, the super-soft rubber compound helps damp trail chatter and vibration when things get rough.<\/p>
The large twin lockrings won\u2019t be to everyone\u2019s taste, though. They sit taller than the rest of the grip and, if you\u2019re used to hanging your hands off the end of the bar, you may find the outer ring a little intrusive under the meaty outer edge of your palm, especially on bigger impacts.<\/p>
<\/div>
Truvativ Descendant grips<\/h3>

<\/div>
$\"Truvativ$
The horizontal mushroom design is very grippy, crumpling under the hand as you grip tightly and giving you plenty to hold onto. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price: <\/strong>\u00a330 \/ $32 \/ \u20ac34 as tested<\/li>
Length:<\/strong> 133mm<\/li>
Diameter:<\/strong> 32mm<\/li><\/ul>
The Descendants are consistently grippy and well-damped thanks to their cushy horizontal mushroom tread pattern. <\/p>
This pattern continues around the grip, evolving slowly into a mountain range on the underside for you to dig your fingers into. <\/p>
There\u2019s some rotational movement attributed to the unconsolidated mushroom ribs flexing under the hand, which can be initially off-putting, but once accounted for it adds good comfort on gnarly terrain.<\/p>
A boxed-off outer edge of the grip allows meaty palms to overlap the bar ends unrestricted, while a thin band of tread provides a horizontal grip. <\/p>
The clamp is relatively thin compared to others we’ve tried, enabling easier access to shifters and levers, which small-handed riders will appreciate.<\/p>
Read our full Truvativ Descendant grips review<\/a><\/li><\/ul>
<\/div>
How we tested | mountain bike grips<\/h2>
Mountain bike grips are one of the few contact points between you and the bike and need to be comfortable and grippy, to give you traction in all weather conditions.\u00a0<\/p>
They will usually be made out of soft rubber compound and come in varying sizes, to fit different hands.<\/p>
The best grips can reduce hand fatigue and provide more security on long descents, making them better for long days in the saddle, while increasing your confidence.\u00a0<\/p>
Pricing is usually in the region of \u00a315 to \u00a325, although higher-quality ones can hit over the \u00a330 mark.<\/p>
We test grips over a prolonged period. To ascertain which grips deliver the best performance, we ride them on a mix of trail, enduro and downhill trails in varying conditions. They get switched between bikes and tested back to back until their pros and cons can be summarised.<\/p><\/div><\/div>
Also consider\u2026<\/h2>
The following mountain bike grips scored fewer than four out of five stars when our reviewers tested them, but they might just tick the right boxes for you. <\/p>
All Mountain Style Cero<\/h3>

<\/div>
$\"All$
The half-waffle pattern underneath adds extra purchase for your fingers. – Steve Behr \/ Our Media<\/figcaption><\/figure>
Price: <\/strong>\u00a327 \/ $33 \/ \u20ac30 as tested<\/li>
Length:<\/strong> 132mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
All Mountain’s Style Cero grips use a comfortable rubber compound that aids in damping trail vibrations and adds mechanical grip when wearing gloves.<\/p>
A slight outboard flange helps keep your hands centred on the grips, while the half-waffle underside keeps your fingers in place.<\/p>
While the knurled pattern adds to the grip, it’s certainly not as effective as others we have tested.<\/p>
<\/div>
Deity Knuckleduster<\/h3>

<\/div>
$\"Best$
The Knuckledusters have a 32mm diameter, making them suitable for larger hands. – Immediate Media<\/figcaption><\/figure>
Price: <\/strong>\u00a319 \/ $22 \/ AU$40 as tested<\/li>
Length:<\/strong> 132mm<\/li>
Diameter:<\/strong> 32mm<\/li><\/ul>
The Knuckledusters are new-school grips that combine a single lockring with an internal conical sleeve, to give a solid hold on the bar while still allowing you to use its full width.<\/p>
Coupled with the waffle design on the underside, the upper mushroom pattern provides decent comfort. At 32mm in diameter, they\u2019ll suit riders with larger hands.<\/p>
With each flange of the mushroom pattern standing independently, the grips can feel vague when you start to push harder. This can be fixed by holding on tighter, but doing so often leads to early arm pump.<\/p>
<\/div>
Ergon GE1 EVO Factory<\/h3>

<\/div>
$\"Ergon$
The grips are overly long, making it harder to get levers and shifters set up to our liking. – Steve Behr \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a336.99 \/ $44.95 \/ \u20ac44.95 as tested<\/li>
Length:<\/strong> 141mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
Using a softer rubber than Ergon’s standard grips, the GE1 EVO Factory offers good traction thanks to a tacky compound, which provides high levels of control.<\/p>
The GE1 EVO Factory features a flared design that helps to distribute pressure across the grip evenly while keeping your hands centred on the grip.<\/p>
The dimensions of the grips make it difficult to set up brakes and shifters in preferred positions because they are longer than most other grips on the market.<\/p>
<\/div>
Ergon GFR1<\/h3>

<\/div>
$\"Best$
At 141mm, these are some long grips. – Russell Burton \/ Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a333 \/ $40 as tested<\/li>
Length:<\/strong> 141mm<\/li>
Diameter:<\/strong> 30mm<\/li><\/ul>
With their raised finger ridges and knurled pattern, the GFR1s give good mechanical grip, despite the rubber compound not being that tacky. The ribbed section under the palm damps vibrations well, taking the sting out of the trail while maintaining direct handling.<\/p>
These are longer than many grips, so take up the most handlebar real estate and their end-plugs stick out further, too. They\u2019re also pricy. We\u2019d like to see a flange at the outboard end and more thumb cushioning.<\/p>
<\/div>
Lizard Skins Wasatch grips<\/h3>

<\/div>
$\"Lizard$
The grips measure 136mm long with a diameter of 29mm and are available in five colours. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Price:<\/strong> \u00a332 as tested<\/li>
Length:<\/strong> 136mm<\/li>
Diameter:<\/strong> 29mm<\/li><\/ul>
The Wasatch grips have a narrow diameter, which gives direct trail feedback. They feel great in the hands, though this comes at a high price and with little cushioning. <\/p>
With tapered design from the clamp, the grips follow the contour of your hands well, remaining a consistent diameter to the end, enabling you to overhang your palms. <\/p>
Horizontal tread keeps your hands from rotating on heavy landings, while the diamond-cut grip pattern keeps bare and gloved hands stuck to the bar. <\/p>
There isn\u2019t much cushioning incorporated into the design, with hand and arm fatigue quick to set in on rougher terrain, due to increased trail buzz. <\/p>
The rubber compound covers the bar end, and remains grippy on cold days and when lathered in mud. Grip twist wasn\u2019t an issue, with the single clamp keeping the Wasatch fixed to the bar.<\/p>
<\/div>
Race Face Love Handle<\/h3>

<\/div>
$\"Best$
These are slim grips, which makes them good if you like a bit more feedback through the bar. – Immediate Media<\/figcaption><\/figure>
Price:<\/strong> \u00a323 \/ $25 \/ AU$36 as tested<\/li>
Length:<\/strong> 130mm<\/li>
Diameter:<\/strong> 28\u201330mm (tapered)<\/li><\/ul>
These double-lockring grips use a mushroom pattern under the palm for comfort and have a knurled underside that gives plenty of purchase. Flipping them puts the knurled section under your palms for even more feedback through the bar.<\/p>
One of our first test pairs had a lockring drop off, but the problem hasn\u2019t recurred with our second set. These grips are slim, tapering down to 28mm, and give a lot of feedback through the bar, which won\u2019t suit everyone. They take longer to bed in than we\u2019d have liked, too.<\/p>
<\/div>
Mountain bike grips buyer’s guide<\/h2>
$\"\"$
Grips are one of the few contact points between you and your bike. – Mick Kirkman \/ Our Media<\/figcaption><\/figure>
Grips appear to be one of the most basic components on your bike \u2013 usually consisting of nothing more than an inner plastic tube covered in a rubber compound and featuring either a single or dual clamp. However, they are an important contact point that can seriously impact performance.<\/p>
What to look for in mountain bike grips<\/h3>
How a grip performs can be determined by its size and profile, grip pattern, clamp design, the compound of the rubber and the quality of the materials used.<\/p>
Getting the formula right improves grip and hand security on the handlebar, leading to better control and less fatigue when hitting the trail.<\/p>
Grips are quite personal items, more so than most bike components, with people’s preferences depending on their hand size and the feel they desire through the handlebar.<\/p>
Smaller-diameter grips will often feature less cushioning, resulting in more feedback being passed on to your hands. Thicker grips will help more in reducing trail buzz.<\/p>
Thicker grips are usually better at reducing fatigue for this reason, with the larger contact area also helping to keep your hands in a relaxed position as opposed to balled up around a thinner grip.<\/p>
The connection of the grip to the handlebar is fundamental in stopping grip rotation on hard impacts \u2013 a frightening feeling that sees both grips turn into twist throttles.<\/p>
Solid mounting clamps are needed for this, with most grips featuring a single clamp on the inside to secure them to the bar, ensuring they can\u2019t slide off in your hands.<\/p>
Most grips will use multiple patterns to aid in all areas of contact with the bar.<\/p>
Many grips use ribbed mushroom tread patterns on the topside because the design adds cushioning when deformed and provides a large surface area to boost adhesion to your hands.<\/p>
The underside often sees horizontal ribs for your fingers to wrap around, creating an extra layer of connection and countering hand rotation.<\/p>
The rubber compound is also important in the traction the grip provides, with manufacturers often listing the hardness of its rubber using a durometer reading.<\/p>
Softer compounds will be more tacky, although this often comes at the sacrifice of needing to replace the grips faster.<\/p>
Harder compounds will last longer, but won\u2019t offer the same mechanical grip.<\/p>
Mountain bike grips features<\/h3>
Clamp<\/h4>
$\"Race$
Most modern grips use single clamps. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
Clamps, otherwise known as lockrings, sit at one or both ends of lock-on grips and cause excess friction with the bar, keeping the grip in place. Usually tightened with an Allen key, they stop the bar from rotating on the handlebar.<\/p>
Chamfered and tapered<\/h4>
The profile of the grip is often chamfered (angled at the extremity) or tapered (sloped all the way across) to the inside clamp to give a more ergonomic feel in the hand and protect your digits from bashing into the clamp.<\/p>
Compound<\/h4>
$\"ODI$
Soft compounds tend to be grippier. – Andy Lloyd \/ Our Media<\/figcaption><\/figure>
The rubber compound of the grip is usually a good indication of how grippy it is, with softer compounds proving to be tackier than harder ones.<\/p>
Body<\/h4>
Lock-on grips will feature a hard plastic body onto which the compound is coated. This enables the grip to slide onto the handlebar and protects the handlebar from the clamp.<\/p>
Bar-ends<\/h4>
Bar-ends are usually built into grips, covering the outside of the handlebar and removing the danger of piercing yourself on the bar like a spud on a spud gun.<\/p> <\/body><\/html>\n
","protected":false},"excerpt":{"rendered":"
They’re a key contact point, so don’t skimp on grip, comfort or security <\/p>\n","protected":false},"author":24,"featured_media":63823,"template":"","categories":[1,36],"acf":{"readingTimeMinutes":"20"},"uagb_featured_image_src":{"full":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips.jpg",2560,1703,false],"thumbnail":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-150x150.jpg",150,150,true],"medium":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-300x200.jpg",300,200,true],"medium_large":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-768x511.jpg",768,511,true],"large":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-1024x681.jpg",800,532,true],"1536x1536":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-1536x1022.jpg",1536,1022,true],"2048x2048":["https:\/\/c01.purpledshub.com\/uploads\/sites\/43\/2024\/05\/best-mountain-bike-grips-15-of-our-favourite-lock-on-mtb-grips-2048x1362.jpg",2048,1362,true]},"uagb_author_info":{"display_name":"importmanagerhub@sprylab.com","author_link":"https:\/\/c01.purpledshub.com\/cyclingplus\/author\/importmanagerhubsprylab-com\/"},"uagb_comment_info":0,"uagb_excerpt":"They're a key contact point, so don't skimp on grip, comfort or security","_links":{"self":[{"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/rss_feed\/63822"}],"collection":[{"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/rss_feed"}],"about":[{"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/types\/rss_feed"}],"author":[{"embeddable":true,"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/users\/24"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/media\/63823"}],"wp:attachment":[{"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/media?parent=63822"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/c01.purpledshub.com\/cyclingplus\/wp-json\/wp\/v2\/categories?post=63822"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

Also consider\u2026<\/h2>The following mountain bike grips scored fewer than four out of five stars when our reviewers tested them, but they might just tick the right boxes for you. <\/p>

Mountain bike grips features<\/h3>

Chamfered and tapered<\/h4>The profile of the grip is often chamfered (angled at the extremity) or tapered (sloped all the way across) to the inside clamp to give a more ergonomic feel in the hand and protect your digits from bashing into the clamp.<\/p>

Body<\/h4>Lock-on grips will feature a hard plastic body onto which the compound is coated. This enables the grip to slide onto the handlebar and protects the handlebar from the clamp.<\/p>

Also consider\u2026<\/h2>
The following mountain bike grips scored fewer than four out of five stars when our reviewers tested them, but they might just tick the right boxes for you. <\/p>

Chamfered and tapered<\/h4>
The profile of the grip is often chamfered (angled at the extremity) or tapered (sloped all the way across) to the inside clamp to give a more ergonomic feel in the hand and protect your digits from bashing into the clamp.<\/p>

Body<\/h4>
Lock-on grips will feature a hard plastic body onto which the compound is coated. This enables the grip to slide onto the handlebar and protects the handlebar from the clamp.<\/p>